Fiddes- Hardwax Oil Sample Sachet - Coloured Oils x 10 colours to choose

Fiddes- Hardwax Oil Sample Sachet - Coloured Oils x 10 colours to choose

£1.50

Product Information

 
Fiddes - HARDWAX OIL – Coloured Oil 
sample sachet 5ml
Choose colour Required

 

A blend of natural oils & waxes offering
exceptional durability & resistance for internal natural wood flooring,
kitchen worktops (wood) and areas subjected to a high degree of
wear.

 

Produces a quick drying, natural satin / matt water
repellent, tread-fast finish that will not peel or flake. To maintain /
renovate, simply wash, buff or re-apply, following the guidelines
below.

 

Suitable for application onto children’s toys – EN
71-Toy Safety Test
Resistant to liquids: Tested in accordance with BS 3900
G5
Resistant to wear: Tested in accordance with BS3900
E15

 

Preparation

Ensure all surfaces are
clean, dry, and free from any previous finish. Sand the substrate with a fine
150 grade sanding paper or 150 grit sanding disk, removing all traces of
dust.

 

Application

Ensure all areas to be coated are extremely well ventilated during
and after application. Always test on a small area prior to initial application.
No primer required. Maximum 2 coats recommended. Apply at room temperature.
Fiddes Hard Wax Oil is formulated for application directly, and does not require
thinning.


First Coat - Stir contents
thoroughly before and during use, and apply in a warm, well ventilated room.
Apply THINLY using a good quality bristle or synthetic brush and lay EVENLEY,
following the direction of the grain. Remove any surplus material immediately
with a cloth, carefully checking all areas for any excess application. Leave to
dry 4-6 hours in warm, dry well ventilated conditions, or preferably
overnight.


Second Coat - Apply as first coat, THINLY, allowing
good ventilation. Leave to dry 4-6 hours in warm, dry well ventilated
conditions, or preferably overnight. Clean applicator with White
Spirit.


When the
surface area is completely dry, a light buff will further enhance the sheen
level.

 
Notes:
 

Ensure all
areas to be coated are extremely well ventilated during and after application
has occurred.

Always test on
a small area prior to major application.

 

Certain dense
or oily substrates may only require a single application, and subsequently
buffed to achieve the desired finish.

 

Longer drying
periods may occur during application in cold, damp or humid
conditions.

 

Always apply
sparingly and remove any excess product thoroughly.

 

Re-Application:
To renovate previous application of Fiddes Hard Wax Oil, lightly sand area with
150 grit sandpaper, and re-apply sparingly.

 
Coverage:
 

A single application will cover approximately 20-24 square meters per
litre,depending on the density of the substrate.

 
 
Delivery price is
UK Mainland Only and will go via myhermes on a 3-5 day service, for other areas please call us for
price
.

Technical Specifications

  • Weight
    0.01kg
  • Brand
  • Condition
    New

Customer Reviews

Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product