Fiddes 5ltr Premier HPX Wooden Floor Water Based 2 Component Lacquer Satin

Fiddes 5ltr Premier HPX Wooden Floor Water Based 2 Component Lacquer Satin

£87.00

Product Information

4.5ltr lacquer + 0.5ltr hardener

High performance 2 component lacquer

Water based Polyurethane finish

Ideal for commercial & high traffic domestic floors

High resistance to abrasion

Lacquer is a high performance, water based, 2 component cross linking 100%Polyurethane floor finish. Ideal for the surface treatment of wooden floors incommercial & domestic areas, that are subject to heavy wear.Fiddes Premier HPX Floor Lacquer has a high resistance to abrasion, and also offers excellent resistance to liquids in areas of medium to heavy traffic. PREPARATION
Ensure all surfaces are clean, dry, and free from anyprevious finish. Fill any cracks/knots with Fiddes Floor Filler Gel where required.Sand the substrate with a fine 120/150 grade sanding paper or 120/150 gritsanding disk, removing all traces of dust. APPLICATION
Do not thin. Add 500ml HPX Hardener to 4.5lt and stir vigorously(Ratio 9:1)Once mixed, use within 4 hours.Apply 1st coat evenly and consistently with a roller or good quality brush, following the direction of the grain where possible.Once dry, lightly sand and apply a 2nd  coat of Fiddes Premier HPX Floor Lacquer following guidelines above.Once dry, lightly sand and repeat the process for 3rd application if required. Fiddes Premier HPX Floor Lacquer is re-coatable in 2-3 hours at normal room temperature. 3 coats of Fiddes Premier HPX Floor Lacquer is recommended
NB:
1) Always test intercoat adhesion prior to major application.
2) Longer drying periods may occur in cold, damp or humid conditions.
3) Allow 24 Hours before use. Full curing in 7 days.
4) Store in frost free area.
5) Once mixed, HPX cannot be rehardened.
Cleaning & Maintenance
For regular light cleaning, a damp cloth should be applied and resulting clean arealeft to dry. Periodically, an application of Fiddes Floor Surface Cleaner is recommended.
Application: Roller / Brush / Pad
Drying Time: 2-3 Hours at room temperature
Coverage: 8-10 sqm per litre at 120-10

Technical Specifications

  • Weight
    0.01kg
  • Brand
  • Condition
    New

Customer Reviews

Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product