Fiddes Premier SP Floor Lacquer is a water based, 1 component self cross linking Polyurethane/Acrylic floor finish, for the surface treatment of wood floors in residential/domestic areas. Fiddes Premier SP Floor Lacquer has a high resistance to abrasion and wear, and also offers good resistance to liquids in areas of light to medium traffic. Preparation Ensure all surfaces are clean, dry, and free from any previous finish. Fill any cracks/knots with Fiddes Floor Filler Gel where required. Sand the substrate with a fine 120/150 grade sanding paper or 120/150 grit sanding disk, removing all traces of dust. Application Apply an initial coat of Fiddes Premier SP Floor Lacquer evenly and consistently with a roller or good quality brush, following the direction of the grain where possible. Once dry, lightly sand and apply a second coat of Fiddes Premier SP Floor Lacquer following guidelines above. Once dry, lightly sand and repeat the process for a third application. Fiddes Premier SP Floor Lacquer is re-coatable in 2-3 hours at normal room temperature. 3 coats of Fiddes Premier SP Floor Lacquer recommended. For regular light cleaning, a damp cloth should be applied and resulting clean area left to dry. Periodically, an application of Fiddes Floor Surface Cleaner is recommended. •� Application: Roller / Brush / Pad •� Drying Time: 2-3 Hours at room temperature •� Coverage: 8-10 sqm per litre at 120-100g/m2 per coat •� Thinners: Water •� Coats: Three coats •� Sheen: Gloss/ Satin / Matt •� Recommended for use on: Floors, Furniture and Panelling. •� Packaging: 5lt •� Always test intercoat adhesion on a small area prior to major application. •� Longer drying periods may occur during application in cold, damp or humid conditions. •� Full cure/hardness will be reached in 7 days. •� Store in frost free area.